Linux driver for ECI HiFocus ADSL USB
and Globespan based modems

EciAdsl: DSLAM parameters

Posted by FlashCode, 2004-04-01 11:23
New major feature has been added to CVS version of driver.
It is now possible to modify DSLAM parameters remotely.
Main goal is to modify his line speed. For example: from 128 kbits/sec to 512 or from 512 to 1024.
Warning: no test has been made with degrouped line or another speed.
Technically, we send 4 bytes (and 2 for speed) to the DSLAM, after authentication step.
To activate this option, you have to install latest CVS version and add this line to your /etc/eciadsl/eciadsl.conf file:
DSLAM=0x50 0x3A 0x67 0x00 0xZZ 0x00
To change speed from 128 to 512, replace ZZ by 02 (0x0200 = 512), from 512 to 1024 by 04 (0x0400 = 1024).
Warning: all other value or incorrect data may prevent you from connecting definitively (manual intervention of your provider required).
We are not responsible of any data/hardware damage due to this feature.
For any question or to know more about other possible modifications (under test), feel free to contact us.
Have a nice surf!
Re: DSLAM parameters
Posted by arky, 2004-11-29 09:20
Didn't work for me !

Can you point to better information somewhere ?

Re: DSLAM parameters
Posted by FlashCode, 2004-11-29 15:10
Please look at next news and link, which is:
Re: Paramètres du DSLAM
Posted by Tof, 2004-12-02 15:19
C'est un truc posté un 1er avril : poisson d'avril évident !
Surtout que le débit n'est pas choisir par le modem, mais par le FAI et donc stocké au fond de leurs serveurs !!

April fools ! look at the date of the post !